Osmo Natural WR Base Coat 0.75/2.50 L
WR Base Coat is not a wood finish and is a base coat only. A finishing product from the Osmo range is required within three months. No sanding – just repaint. No priming required. Simple and even coverage. The coating can be adjusted throughout the working life. The protective layer contains additives that protect the wood from mold, rot, lichens and insects, and have been tested over a long period of time and under extreme conditions.
Recommended Purpose
Osmo WR Base Coat 4001 is a wood preservative for amateur use against wood rotting fungi, wood dtaining fungi and wood destroying insects on all outside wood which is out of direct ground contact and/or surface water e.g.: facades,windows (inner and outer parts), exterior doors (inner and outer parts), carports, shutters and balcony railings. Not for indoor application.
Methods of Application
Apply by (brush or roller) spreading out thinly and evenly along wood texture. Number of coats required: 2-3, depending on wood species and surface characteristics. Coat the clean, dry and frost-free wood generously – if possible on all sides. The product should be applied evenly in order to get best results. Processing temperature: 10 – 30°C
Drying Time
Approx. 12 hours (normal climatic conditions, 20 °C/ 65 % rel. humidity). Lower temperatures and/or higher air humidity increases the drying time.
Coverage of WR Base Coat
1 litre covers approx. 5-6 m² with one coat. Product coverage depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to reduced coverage. Osmo WR Base Coat is not to be used alone, instead it is a clear impregnation to protect wood against rot, blue stain and insect attack.
Caution: The appearance of the product or the packaging (container) on the picture may not correspond to the actual appearance of the product or the size of the packaging.